Page 1 of 1

Other iontophoresis machine related useful links

Posted: Fri Jan 20, 2006 1:50 pm
by admin

Links to purchase Fischer MD-1a, idrostar and i2ma

Posted: Wed Nov 29, 2006 9:01 am
by admin
Fischer MD-1a

idrostar, idrostar pro (formerly iomax 4) and i2ma

Posted: Wed Nov 29, 2006 9:48 pm
by superyou
Got mine from the Fischer website:



convert to AC

Posted: Fri May 07, 2010 3:01 pm
by doron
This link to convert Drionic to electricity (company's proprietary batteries too expensive):

is not active.

Can you supply the directions for converting...


Posted: Fri May 07, 2010 3:43 pm
by admin
Try this: ... eries.html

Edit -- above one stopped working so here is another. You need to wait for it to load: ... eries.html

convert to AC

Posted: Sat May 08, 2010 10:19 pm
by doron
It's there.

Thanks a lot.

Posted: Sun May 09, 2010 11:33 am
by admin
Also check out the picture on my Drionic experiences page where I have a photo of how I converted to regular AA batteries. Lot more simpler than what Caroline did, but I am not completely sure if AA batteries work just like the Drionic batteries.

The green light did light up when I converted the machine to AA batteries and used it for a short time.

Posted: Thu Apr 21, 2011 12:47 am
by sweatyguy
I recommend AGAINST Drionic.

Before I use Idromed, I use Drionic for around 2 years. I actually bought two sets, as the first set went dead after several months. I first modified them to accept 9V batteries, then AA batteries (x6), and finally power adapters.

There were some effect, but only where your hands/feet got in touch with the felt pads. That is one problem since the sweating area is not flat.

Another problem is PAIN. The current went up and down continuously, and it is exactly change of current that is causing pain!

I would infer that Drionic was designed not by a hyperhidrosis sufferer.