Need help with machine

Drionic, Fischer MD-1a, Idrostar, Iontex, i2ma, other lesser known products and home-made machines.
melinda
Posts: 15
Joined: Thu Sep 09, 2010 6:21 pm

Need help with machine

Postby melinda » Thu Sep 09, 2010 6:30 pm

I have the Fischer machine and the instructions say to fill so the electrodes are completely immersed. That's all the way to the top. I'm confused, because if I fill it that high, once I insert my feet it will overflow. I also read it should just be filled to the top of the toes on the forums.

Can someone please help me? How high are you filling the trays?

admin
Site Admin
Posts: 363
Joined: Wed Dec 31, 1969 5:00 pm

Postby admin » Fri Sep 10, 2010 10:36 am

I haven't used that particular device, but usually, you fill it till you cover the are of your foot that sweats. So if you sweat from the sides of your feet half way till your ankles (like I do), you make sure that your feet are immersed in water to that level once inside the bath trays.

For many people, shallow water depth gives best results.

melinda
Posts: 15
Joined: Thu Sep 09, 2010 6:21 pm

Postby melinda » Fri Sep 10, 2010 3:37 pm

Thanks. I actually went ahead and did it like the instructions said. It didn't work though. :( I got no current at all. I am going to try again later.

melinda
Posts: 15
Joined: Thu Sep 09, 2010 6:21 pm

Postby melinda » Sun Sep 12, 2010 8:00 pm

I got it to work by putting baking soda in it. :) It kinda hurts, but not really. A weird feeling. I hope it works!

JamesKing
Posts: 3
Joined: Tue Sep 07, 2010 4:42 am
Contact:

Postby JamesKing » Wed Sep 15, 2010 7:34 am

Water is different in different areas, it all depends on how hard or soft the water is. If it's hard (more minerals) then it will conduct a better charge. I've used both Fischer machines the md-1a and md-2. Just fill the water until it just passes past the area where you sweat. As long as that is covered then you will be treating that area.


Return to “Other Iontophoresis Machines”

Who is online

Users browsing this forum: No registered users and 1 guest