home-made inotophoresis amp ?

Drionic, Fischer MD-1a, Idrostar, Iontex, i2ma, other lesser known products and home-made machines.
Posts: 1
Joined: Mon Apr 15, 2013 8:40 pm

home-made inotophoresis amp ?

Postby mac7 » Mon Apr 15, 2013 8:46 pm

i used a home made iontophoresis 4 times at 12 v (looks like it doesnt work or might take long time)

got an adaptor (24v 3 A ) as i read that 24v worked with all
most people use 1.5-2 amp (sometimes less)
is 3 A safe :?: (am using stailessteal) ?

Posts: 2
Joined: Tue Jun 18, 2013 1:21 pm

Re: home-made inotophoresis amp ?

Postby harrisba » Thu Jun 20, 2013 4:58 am

It doesn't matter, your body which have big resistance will pull only small amount of amps. How much will it pull depends on voltage, and 24 v is safe. I use laptop charger on 24 volts even though it has huge current it doesn't matter because your body wont take all of it.
You can think of it this way... Voltage is like a pressure, and amps are water that flows, you can have lot of water but it wont flow if you don't have enough pressure.

Return to “Other Iontophoresis Machines”

Who is online

Users browsing this forum: No registered users and 1 guest